Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® A3WG4 - PA66-GF20 - BASF

Material Data Center offers the following functions for Ultramid® A3WG4:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Ultramid A3WG4 is a 20% glass fiber reinforced heat stabilized injection molding PA66 grade.
加工/物理特性干 / 已调节单位Test Standard
ISO数据
模塑收缩率, 平行 0.6 / * % ISO 294-4, 2577
模塑收缩率, 垂直 1.2 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 7250 / - MPa ISO 527
断裂应力 148 / - MPa ISO 527
断裂伸长率 2.7 / - % ISO 527
无缺口简支梁冲击强度, +23°C 43 / - kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 37 / - kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 7.4 / - kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 7.1 / - kJ/m² ISO 179/1eA
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 260 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 247 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 260 / * °C ISO 75-1/-2
其它性能干 / 已调节单位Test Standard
密度 1260 / - kg/m³ ISO 1183
典型数据
加工方法
注塑
特殊性能
经热稳处理的/耐热的
地区供应
北美
其他信息
注塑成型
PROCESSING
injection molding, Melt temperature, range: 265 - 300 °C
injection molding, Mold temperature, range: 80 - 90 °C
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.